What should you do first in a power cut?
In a power cut, first establish whether there is any danger before you switch anything on in the distribution board. If you smell burning, or see smoke, sparks or scorched socket outlets, do not switch anything back on. In the event of smoke or fire, call the fire brigade immediately on 112.
- If there is water in the basement or at the distribution board, do not enter the room and do not touch anything. According to the BBK (Federal Office of Civil Protection and Disaster Assistance), flooded distribution boards, switches and socket outlets may pose a danger to life.
- A power cut on its own is not an emergency. The BBK asks people to call the police and fire brigade emergency numbers only in genuine emergencies so that the lines are not overloaded.
During the power cut, switch off heating appliances such as the cooker, oven, iron, kettle and fan heater. This way they will not start up unattended when the power comes back. The BBK recommends this as well.
Just your home or the whole street?
Whether the power cut affects only your home or the whole street determines who is responsible. Look out of the window: do the neighbours have lights on, are the street lights working? In a block of flats, ask whether other flats have power.
If the whole street is dark, the fault lies in the public grid, and no electrician can fix it in your home. According to the BBK, your grid operator provides information on the outage and how long it is expected to last.
| Grid operator | Area | How to find information |
|---|---|---|
| SWM Infrastruktur | City of Munich and some surrounding municipalities | Outage map on swm-infrastruktur.de; report faults to the M-Sicherheitsservice, around the clock on 0800 796 888 000 (free of charge within Germany) |
| Bayernwerk Netz | Municipalities in the grid area of Bayernwerk Netz GmbH | Interactive outage map on bayernwerk-netz.de, which also lets you report new faults and lists the fault hotline number |
You can find out which grid operator is responsible for you from your electricity bill: under § 40 of the Energiewirtschaftsgesetz (EnWG, German Energy Industry Act) it must state the grid operator's code number. During a major outage, keep phone calls to the essentials, because mobile networks quickly become overloaded.
How do you check circuit breakers and the RCD?
If the neighbours have power, the cause of the power cut usually lies in your own installation, and often just one protective device in the distribution board has tripped. There are two possibilities: the miniature circuit breaker (MCB), i.e. the fuse for a single circuit, and the RCD, which disconnects several circuits when current flows along an unintended path. You can recognise a tripped device by its lever pointing down. Proceed as follows:
- Take a torch and open only the door of the distribution board. Leave the covers closed.
- Look for the device whose lever is down. An RCD also has a test button marked T.
- Unplug everything in the affected area and switch off permanently connected appliances.
- Switch the tripped device back on once.
- If it holds, plug the appliances back in one at a time. If it trips with a particular appliance, leave that appliance unplugged and have it checked.
- If you still have screw-in fuses, replace a blown fuse only with one of the same amperage, never a higher one. Change only the fuse cartridge. Never remove or bridge the gauge ring (Passeinsatz). If you are unsure, call a qualified electrical contractor.
Note: Do not switch a circuit breaker or RCD on several times in a row. If it trips again immediately, even with no appliances connected, there is a fault in the installation.
When should you call an electrician?
Call a qualified electrical contractor as soon as the power cut points to a fault in the building installation or there is a danger. In these cases, do not switch anything back on:
- Smell of burning, traces of smoke, discoloured or hot socket outlets and switches
- A circuit breaker or RCD trips again immediately, even with all appliances unplugged
- Water in the distribution board, in junction boxes, on cables or in the basement
- Your home has no power, the neighbours do, and no device in the distribution board is in the down position
Do not open any covers and do not work on the installation yourself. Under § 13 of the Niederspannungsanschlussverordnung (NAV, the German Low Voltage Connection Ordinance), work on the building installation may only be carried out by the grid operator or by an installation company listed in a grid operator's register of approved installers.
How long does the fridge stay cold?
According to the Verbraucherzentrale Niedersachsen (consumer advice centre of Lower Saxony), a fridge stays cold for about four to six hours in a power cut, depending on how full it is and its insulation, as long as the door stays closed. A freezer often holds its temperature for up to 48 hours with the door closed, and longer when well filled than when half empty. So open both appliances as rarely as possible.
Eat perishable foods such as dairy products, meat, fish, egg dishes and prepared salads first. Raw animal products must be cooked through completely after thawing. According to the Verbraucherzentrale, partially thawed ice cream should be thrown away to be on the safe side.
How do you prepare for long outages?
Prepare for a longer power cut with supplies for a few days: the BBK recommends that every household can manage that long without outside help. According to the BBK, grid operators can usually limit local outages to a few minutes through switching operations. With severe damage to the grid, however, it can take days.
- Supplies of drinking water, food, medicines and hygiene items
- Cash, because cash machines and tills may fail
- Torches or camping lamps with spare batteries
- A charged power bank for your mobile phone and other devices
- A battery-powered or wind-up radio for announcements from the authorities
- Candles and gas appliances only under supervision and with adequate ventilation
If you want to supply parts of your home yourself in an emergency, for example with battery storage or a generator, plan this before the next power cut. According to the BBK, such feed-in arrangements and modifications may only be carried out by qualified electrical contractors.
What does an emergency electrician do on site?
In a power cut at home, the emergency electrician locates the cause in your installation and safely isolates faulty circuits or appliances. The rest of the installation is reconnected as far as this is possible without danger. Anything that cannot be repaired immediately is made safe and repaired later. Faults in the public grid, by contrast, can only be fixed by the grid operator.
On site, the questions you had to leave open until then are answered: which circuit has the fault, whether an appliance or the fixed installation is affected and whether water or heat has damaged cables. Afterwards you know which parts of the home have a safe power supply again.
Reinlicht Elektrotechnik is an electrical contractor based in Taufkirchen and is listed in the registers of approved installers of the grid operators in our service area. The 24/7 emergency service runs via the mobile number. It is an additional service and is charged separately; we will give you the terms on the phone.
- Which area is without power: one room, one floor or the whole home?
- Which device is in the down position: a circuit breaker or the RCD?
- Is there a smell of burning, or is water involved?
- What was switched on when the power went off?