Skip to content

E-Check, inspection and maintenance in Munich

Inspect, document, rectify defects: we inspect electrical installations and equipment and give you a report you can present.

Reinlicht Elektrotechnik technician in a hard hat and high-visibility vest checking plans in front of an open control cabinet
Photo: Reinlicht Elektrotechnik

What it covers

We inspect electrical installations and equipment in Munich and the surrounding area: E-Check (electrical safety inspection) for flats and houses, and inspection of fixed installations and portable equipment in businesses under DGUV V3, the German statutory accident insurance regulation for electrical equipment, with test report and inspection findings. On request, we rectify any defects found straight away. For maintenance, we agree fixed intervals with you.

  1. E-Check

    Visual inspection and testing of the electrical installation in a flat, house or business. You receive a test report on the condition of the installation.

  2. DGUV V3 fixed installations

    Periodic inspection of the permanently installed system in a business: distribution boards, protective measures, residual current devices and circuits.

  3. DGUV V3 portable equipment

    Testing of plug-in equipment, from coffee machines to drills, with inspection labels and an equipment register.

  4. Inspection findings and reports

    Documentation of all measured values and defects as evidence for insurers, the employers' liability insurance association, letting or sale.

  5. Maintenance

    Regular checks and upkeep of your installation at fixed intervals agreed with you.

  6. Fault finding

    If the RCD keeps tripping or a circuit fails, we find the cause systematically with measuring equipment.

Does this fit your project? Call us or send an enquiry. We reply within 24 hours and come to look at the situation on site.

How it works

Every job follows the same four steps, whatever its size.

  1. Consultation

    We look at the building and the installation on site and agree with you on what is needed.

  2. Planning

    We define scope, materials and schedule. You receive a written quote.

  3. Installation

    Our team installs to plan and coordinates with you and the other trades.

  4. Inspection

    We test the installation, record the measured values and hand it over to you with a test report.

Frequently asked questions

The most common questions, answered briefly. If yours is not among them, call us or send an enquiry.

What is an E-Check?

The E-Check is an inspection of the electrical installation by a qualified electrical contractor. We check cables, protective measures and equipment by visual inspection and measurement and record the result in a report.

What does DGUV Vorschrift 3 cover?

DGUV Vorschrift 3 requires companies to have their electrical installations and equipment inspected regularly by a qualified electrician. Inspections cover permanently installed systems and portable equipment.

How often must inspections take place?

That depends on the type, use and environment of the installation. The operator sets the intervals in the risk assessment. We advise you on the intervals that are usual for your installation.

Is an E-Check worthwhile for landlords?

Yes. Landlords must ensure that the electrical installation is safe. A test report documents its condition, for example when tenants change.

What happens if defects are found during the inspection?

We record every defect in the report and explain how urgent it is. On request, we rectify it straight away and then inspect again.

Discuss your project

Call us or send an enquiry. We arrange an appointment and come to look at the situation on site.

Call now 24/7 emergency service, Phone: +49 151 61844537Request a quote