Industrial and commercial electrical work in Munich
Our focus: electrical work for businesses, halls and technical plant in Munich and the region, and industrial projects across Germany. We wire, connect and inspect, by arrangement also while operations continue.
5.0 out of 5 from 18 Google reviews, as of October 2026View reviews on Google(opens Google in a new tab)

What it covers
Reinlicht Elektrotechnik is an electrical contractor based in Taufkirchen with a focus on industry and commerce. We install cable trays, wire instrumentation and control (I&C) systems and control cabinets, connect machines and plant, rebuild sub-distribution boards and carry out inspections under DGUV V3, the German statutory accident insurance regulation for electrical equipment. Our clients include businesses in manufacturing, logistics and refrigeration and air-conditioning engineering, in Munich, the Munich district (Landkreis München) and in Maisach and Olching, with industrial projects also in Stuttgart, Hamburg, Nuremberg and Frankfurt.
I&C and control cabinets
Wiring for instrumentation and control: sensors, actuators and controllers, connected to the control cabinets for heating, refrigeration, ventilation and production.
Cable trays and wire mesh trays
Installing trays, wire mesh trays and supports, routing power and control cables separately and in a clear, logical layout, with spare capacity for later extensions.
Machine and plant connections
Three-phase power, supply cables and circuit protection for machines, heat pumps, refrigeration and compressed air systems, coordinated with the manufacturer and the plant builder.
Sub-distribution boards and alterations
New sub-distribution boards, extensions and alterations in halls, warehouses and workshops, planned so that operations can continue as far as possible.
Lighting for halls and workshops
LED lighting for halls, warehouses and workshops, switched or controlled by presence and daylight sensors.
Inspection and maintenance
Periodic DGUV V3 inspection with a test report for the employers' liability insurance association and your insurer, plus maintenance of controllers and control cabinets.
Does this fit your project? Call us or send an enquiry. We reply within 24 hours and come to look at the situation on site.
Scope of work
This is how we structure an industrial job, whether an extension, an alteration or a new installation. You get everything from a single source.
Survey and planning
- Walk-through of the hall or plant
- Power demand from the machine list and connected loads
- Planning of distribution boards, cable trays and lighting
- Coordination with site management and the other trades
Distribution boards and control cabinets
- New or extended sub-distribution boards
- Installation and wiring of control cabinets
- I&C wiring to sensors, actuators and controllers
Cable trays and cabling
- Installing trays, wire mesh trays and supports
- Power and control cables routed separately
- Spare capacity for later extensions
Machine and plant connections
- Three-phase power, supply cables and circuit protection
- Connection of heat pumps, refrigeration and compressed air systems
- Coordination with the manufacturer and the plant builder
Inspection, documentation, handover
- Inspection before commissioning, with measured values and test report
- As-built drawings and system documentation
- Briefing for your team at handover
What you provide
- Floor plan or hall layout
- Machine list with connected loads
- A contact person for coordination
- Access to the hall for the survey and installation
What you get from us
- Electrical design
- Materials and installation from a single source
- Test reports with measured values
- Documentation and as-built drawings
- Briefing at handover
From a Google review
„Vielen Dank für die tolle Arbeit in unserem Laden! Immer wieder gerne!“
Excerpt from our Google Business Profile, quoted verbatim in the original German; omissions are marked with an ellipsis (…). We do not check whether the author used our services.
For businesses and procurement
What you can expect from us before the first cable duct is installed.

- A reply to your enquiry within 24 hours
- Site visit and written quote
- Shutdowns planned in advance and, by arrangement, scheduled during breaks in production or outside core hours
- Coordination with the manufacturer, the plant builder and the other trades
- Handover tested, with measured values and test report
- We accept bills of quantities, drawings and photos by email
Where we work for industry and commerce
Our core area is Munich, the Munich district and the Fürstenfeldbruck district, where we work regularly in Maisach and Olching. We also take on industrial projects in other regions of Germany, for example in Stuttgart, Hamburg, Nuremberg and Frankfurt.
Supplier details
Reinlicht Elektrotechnik GmbH Amtsgericht München, HRB 280916 VAT ID DE358294031 Electrical contractor, Handwerkskammer für München und Oberbayern (Chamber of Crafts)
How it works
Every job follows the same four steps, whatever its size.
Consultation
We look at the building and the installation on site and agree with you on what is needed.
Planning
We define scope, materials and schedule. You receive a written quote.
Installation
Our team installs to plan and coordinates with you and the other trades.
Inspection
We test the installation, record the measured values and hand it over to you with a test report.
Frequently asked questions
The most common questions, answered briefly. If yours is not among them, call us or send an enquiry.
Do you work while operations continue?
Yes, as far as safety allows. We plan any necessary shutdowns with you in advance and, by arrangement, schedule them during breaks in production or outside core hours.
What does I&C wiring involve?
I&C stands for instrumentation and control: measuring, controlling and regulating. We run the cables to sensors, actuators and controllers, terminate them in the control cabinet and test every connection with the plant builder before commissioning.
Do you inspect installations and equipment under DGUV V3?
Yes. We inspect fixed installations and portable equipment and record the results in a test report.
How often do installations and equipment in a business need to be inspected?
The business sets the intervals in its risk assessment. DGUV Vorschrift 3 gives guide values, such as four years for fixed installations and, for portable equipment, between three months on construction sites and two years in offices, depending on use and failure rate. We inspect according to your intervals and record every result in a test report.
What documents do you receive after an inspection or alteration?
After an inspection you receive the test report with the measured values for every installation and every item of equipment inspected. After an alteration or new installation we hand over the system tested and with a test report, together with documentation of the changes for your records, your maintenance team and your insurer.
Do you also work for businesses outside Munich?
Yes. We work regularly in Munich, the Munich district and the Fürstenfeldbruck district, including Maisach and Olching. We also take on industrial projects in other regions, for example in Stuttgart, Hamburg, Nuremberg and Frankfurt. Tell us the location, scope and timeframe, and we will work out how to staff the project.
How does an industrial enquiry work?
You describe the installation, the scope and your preferred dates, ideally with drawings or photos. We then clarify the details on site and prepare a quote for you.
Discuss your project
Call us or send an enquiry. We arrange an appointment and come to look at the situation on site.