Skip to content

DGUV V3 inspection: obligations for businesses

Technically reviewed by Reinlicht Elektrotechnik, as of 7 November 2026

The short answer

Under DGUV Vorschrift 3 (DGUV V3, the German statutory accident insurance regulation for electrical equipment), the employer must have electrical installations and equipment inspected before first commissioning and at fixed intervals thereafter. The employer sets the intervals in the risk assessment. As guideline values, the DGUV gives four years for fixed installations and six months for portable equipment. Inspections may be carried out by a qualified electrician appointed as a competent person.

What are the employer's obligations?

Responsibility lies with the employer (Unternehmer), not with the inspector. Under § 5 of DGUV Vorschrift 3, the employer ensures that electrical installations and equipment are inspected for proper condition: before first commissioning, after an alteration or repair before being put back into service, and thereafter at specified intervals.

The Betriebssicherheitsverordnung (BetrSichV, German Ordinance on Industrial Safety and Health) sets out the same obligation from the perspective of occupational safety. Under § 14, the employer must have work equipment that is exposed to damaging influences inspected at regular intervals by a person qualified to carry out inspections. Under § 4(4), work equipment subject to inspection may only be used if the inspections have been carried out and documented.

  • draw up the risk assessment and set the type, scope and intervals of the inspections in it
  • select and appoint a suitable inspector, internal or external
  • record and keep the inspection results
  • have defects found remedied or take the affected equipment and parts of the installation out of service

Note: Even if a service provider carries out the inspection, the employer remains responsible for intervals and continued operation. This is stated in DGUV Information 203-071.

How are the risk assessment and inspection intervals linked?

There are no fixed statutory intervals for electrical inspections. Under § 3(6) of the Betriebssicherheitsverordnung, the employer determines the type, scope and intervals of the inspections. The intervals must be set so that the work equipment can be used safely until the next inspection.

DGUV Information 203-071 lists criteria for setting them, including:

  • instructions from the manufacturer and installer
  • conditions of use such as dust, moisture, oils, mechanical stress or harsh operation
  • duration and frequency of use
  • failure behaviour and results of previous inspections
  • frequency and quality of maintenance
  • qualifications and experience of the users

If the business lacks the expertise for this, the DGUV recommends expert support, for example from the inspector. If the business deviates from the guideline values in DGUV Vorschrift 3, the reasons are stated in the risk assessment.

Which inspection intervals apply to installations and equipment?

The implementation guidance to § 5 of DGUV Vorschrift 3 gives guideline values for normal operating and ambient conditions. It distinguishes fixed installations and equipment (Table 1A) from portable equipment (Table 1B), i.e. devices that are moved during operation or can easily be relocated.

Guideline values under DGUV Vorschrift 3, implementation guidance to § 5, Tables 1A and 1B (extract)
Installation or equipmentIntervalInspected by
Electrical installations and fixed equipment4 yearsQualified electrician
Installations and fixed equipment in special locations and installations (DIN VDE 0100 Group 700)1 yearQualified electrician
Residual current devices in fixed installations, test via test button6 monthsUser
Portable equipment, extension leads and connecting cablesGuideline 6 months, on construction sites 3 monthsQualified electrician; with suitable measuring equipment also an electrically instructed person
Maximum intervals if the failure rate is below 2 per centConstruction sites, production and workshops 1 year, offices 2 yearsas above

The failure rate is the proportion of devices in an operating area that show defects during inspection. If it is no more than 2 per cent, the interval is considered adequate under DGUV Vorschrift 3 and may be extended up to the maximum values. According to DGUV Information 203-071, devices that already fail the visual inspection are included in the count.

Note: Fixed installations that are continuously maintained by qualified electricians and monitored by measuring systems, for example insulation monitoring, meet the inspection obligation under DGUV Vorschrift 3 even without periodic inspection. This does not apply to portable equipment.

Who may carry out the DGUV V3 inspection?

Under DGUV Vorschrift 3, responsibility for the inspection lies with a qualified electrician (Elektrofachkraft). For inspections under § 14 of the Betriebssicherheitsverordnung, this person must also be appointed as a person qualified to carry out inspections (befähigte Person). Under § 2(6), this is a person with suitable vocational training, professional experience and recent professional activity.

DGUV Information 203-071 adopts the requirements of TRBS 1203 (German Technical Rule for Operational Safety) for electrical hazards:

  • completed vocational training in electrical engineering or a degree in electrical engineering
  • at least one year of experience in installing, maintaining or inspecting electrical installations and equipment
  • recent activity in this field
  • up-to-date knowledge of the regulations, for example through training or exchange of experience

Under DGUV Vorschrift 3, electrically instructed persons may inspect portable equipment using suitable measuring and testing devices under the direction and supervision of a qualified electrician. DGUV Information 203-071 makes clear that they do not carry out inspections on their own responsibility but support the inspector within the inspection team. If you appoint a service provider, have the inspector's qualification confirmed in advance.

How does the inspection work while the business keeps running?

DGUV Information 203-071 recommends scheduling the inspections around operations and coordinating them with the users. No inspection may take place without a risk assessment for the inspection work itself, because inspecting also creates hazards for the inspector and the surroundings.

  1. Update the inventory of installations and equipment; have drawings and previous reports ready.
  2. Define the scope and dates of the inspection; split areas with machines, servers or cooling into sections.
  3. Brief the inspector on the site if they do not know it.
  4. Inspect visually, test and measure; record the results for each installation and device.
  5. Clearly mark failed devices as unsafe and withdraw them from use.
  6. Assess defects, have them remedied and adjust the intervals in the risk assessment.

For measurements on fixed installations, circuits are switched off one after another. Reinlicht Elektrotechnik is an electrical contractor based in Taufkirchen with a focus on industry and commerce, and inspects fixed installations and portable equipment under DGUV Vorschrift 3. We agree the procedure in advance with your maintenance or facility management team.

What belongs in the test report and documentation?

Under § 14(7) of the Betriebssicherheitsverordnung, the result of every inspection must be recorded and kept at least until the next inspection; electronic records are permitted. Mandatory details are the type, scope and result of the inspection, plus the name and signature of the inspecting person. DGUV Information 203-071 also recommends:

  • unique identification of the installation or device, such as an inventory number or barcode
  • reason for inspection: initial inspection, periodic inspection or inspection after repair
  • standards applied, for example DIN VDE 0105-100 or DIN VDE 0701-0702
  • measured values, test instrument used and next inspection date
  • notes on continued operation: remedying defects, upgrading or taking out of service

The regulations do not generally require an inspection label. For equipment used at changing locations, however, the Betriebssicherheitsverordnung requires proof of inspection at the place of use; a label showing the inspection date and next due date meets this. At the request of the Berufsgenossenschaft (statutory accident insurance institution), the employer keeps an inspection log under § 5(3) of DGUV Vorschrift 3.

Note: Keeping measured values across several inspections lets you spot changes early and extend or shorten intervals with good reason.

What happens without an inspection?

Anyone who allows work equipment to be used without the required inspections having been carried out and documented commits an administrative offence under § 22(1) No. 8 of the Betriebssicherheitsverordnung. The same applies under No. 1 if the risk assessment is missing. Under its § 9, breaches of § 5 of DGUV Vorschrift 3 are an administrative offence under Book VII of the Social Code (Sozialgesetzbuch VII), punishable by a fine of up to ten thousand euros.

The consequences of a loss are usually more serious. Under § 81 of the Versicherungsvertragsgesetz (VVG, German Insurance Contract Act), an insurer may reduce its payment if the policyholder caused the damage through gross negligence. Property insurers may also set their own inspection intervals, as DGUV Information 203-071 notes. The terms of your policy are decisive.

Frequently asked questions

The most common questions, answered briefly. If yours is not among them, call us or send an enquiry.

Is the DGUV V3 inspection required by law?

Yes, from two directions. The Betriebssicherheitsverordnung requires the inspection of work equipment as state law. DGUV Vorschrift 3 is the accident prevention regulation of the Berufsgenossenschaften (statutory accident insurance institutions); breaches of its inspection obligation are an administrative offence.

Does the inspection obligation also cover employees' private devices?

Yes, if the business tolerates their use. DGUV Information 203-071 gives employees' private coffee machines, kettles or radios as examples.

Can we carry out inspections with our own staff?

Yes, if an in-house qualified electrician meets the requirements for a competent person and suitable test equipment is available. Instructed persons only provide support within the inspection team.

Is a DGUV V3 inspection enough for fire insurance?

Not always. Some policies additionally require an inspection by VdS-approved experts. Check the clauses of your policy.

Does the installation have to be re-inspected after an alteration?

Yes. Under § 5 of DGUV Vorschrift 3, a qualified electrician inspects it after an alteration or repair before it is put back into service.

Sources

Laws, standards and figures change. We checked the information as of the date given; the linked original sources are authoritative. This article does not replace advice on your specific case.

  1. BGN: DGUV Vorschrift 3, Paragraf 5 Prüfungen mit Durchführungsanweisung (Tabellen 1A und 1B) (opens in a new tab) accessed on 7 November 2026
  2. BGN: DGUV Vorschrift 3, Paragraf 9 Ordnungswidrigkeiten (opens in a new tab) accessed on 7 November 2026
  3. DGUV: DGUV Information 203-071, Wiederkehrende Prüfungen elektrischer Anlagen und Betriebsmittel, Organisation durch den Unternehmer (Januar 2020, mit Auszug aus TRBS 1203) (opens in a new tab) accessed on 7 November 2026
  4. Bundesministerium der Justiz: Betriebssicherheitsverordnung, Paragraf 2 Begriffsbestimmungen (zur Prüfung befähigte Person) (opens in a new tab) accessed on 7 November 2026
  5. Bundesministerium der Justiz: Betriebssicherheitsverordnung, Paragraf 3 Gefährdungsbeurteilung (opens in a new tab) accessed on 7 November 2026
  6. Bundesministerium der Justiz: Betriebssicherheitsverordnung, Paragraf 4 Grundpflichten des Arbeitgebers (opens in a new tab) accessed on 7 November 2026
  7. Bundesministerium der Justiz: Betriebssicherheitsverordnung, Paragraf 14 Prüfung von Arbeitsmitteln (opens in a new tab) accessed on 7 November 2026
  8. Bundesministerium der Justiz: Betriebssicherheitsverordnung, Paragraf 22 Ordnungswidrigkeiten (opens in a new tab) accessed on 7 November 2026
  9. Bundesministerium der Justiz: Sozialgesetzbuch VII, Paragraf 209 Bußgeldvorschriften (opens in a new tab) accessed on 7 November 2026
  10. Bundesministerium der Justiz: Versicherungsvertragsgesetz, Paragraf 81 Herbeiführung des Versicherungsfalles (opens in a new tab) accessed on 7 November 2026

Questions about your installation?

Call us or send an enquiry. We will assess the situation on site and tell you what is needed.

Call now 24/7 emergency service, Phone: +49 151 61844537Request a quote